Jaunumu un aktualitāšu arhīvs

Šeit jūs atradīsiet pārskatu par visām Lesjöfors aktualitātēm un jaunumiem.

2024

March 6, 2024

The Lesjofors Group, is increasing its global logistics network with the opening of a purpose-built distribution and sales centre for its standard stock range, enabling faster deliveries across Europe.

February 23, 2024

It’s not every day that we’re able to write a headline such as this but having recently supplied gas springs to the Swedish Sea Rescue Society, it felt appropriate.

February 19, 2024

Our group’s high ambitions within sustainability show result. We are advancing in a Sustainable Index among leading companies in Sweden and prepare for a climb in the CDP ranking after committing to the Science Based Target initiative (SBTi).

January 31, 2024

From France to America, Canada to Europe, the first quarter of 2024 will see Lesjӧfors, and its subsidiaries, market every product across multiple sectors at several industry leading exhibitions across the globe.

January 15, 2024

One of Lesjöfors’ focus areas is Sustainable Innovations. To reduce environmental impact, a project has been initiated that focuses on life cycle analyses and eco-design which will be increasingly important in the future.

January 9, 2024

The Lesjӧfors Group, world-leaders in spring and pressing manufacture, has seen an increase in demand for its large diameter spring product range and consequently has invested over one million euros in the purchase of an additional hot coiling line.

2023

December 21, 2023

Lesjöfors has today divested 100 per cent of the shares in Stumpp & Schüle GmbH and its Slovakian subsidiary Stumpp & Schüle s.r.o..

December 21, 2023

Despite a declining general economy, our group is doing well thanks to our broad customer base across many different sectors. Our acquisitions have made us even stronger, and we have put extra focus on some growth areas. We have also elevated our sustainability efforts with new ambitious commitments.

December 11, 2023

The tension spring has historically always been the worldwide spring hero of garage doors. Open an old garage door anywhere and you’ll find a tension spring. However, advance developments in the demanding specialist insulated garage door sector had led to an evolution in spring type, with the torsion spring being substituted partially by the tension spring.

November 10, 2023

It is estimated that 131.8 million people use wheelchairs, that’s 1.85% of the world’s population. The number of individuals with mobility access issues is increasing and Feal Ramps, with their innovative and sustainable ramp systems, are delivering accessibility solutions all over the world and their iRV loading ramp, features traction gas springs supplied by Lesjӧfors.

October 31, 2023

The Lesjӧfors Group, in a first for the spring manufacturing industry, has committed to drive ambitious climate action across its global organisation by signing up to the Science Based Target Initiative (SBTi), in line with the Paris Agreement.

October 16, 2023

Lesjöfors China is granted a prestigious award from their customer ElringKlinger. As Global Supplier of the Year, Lesjöfors’ scoring is the highest any supplier has ever received. A close cooperation within our Group has paved the path to this award.

September 20, 2023

In the dynamic landscape of Asia, where innovation and progress thrive, we are seizing the opportunity to evolve and strengthen our presence. It is with great enthusiasm that we share the decision to transition all John While companies to proudly carry

August 21, 2023

Our sustainability journey is moving fast forward and the Lesjöfors Group is taking action in many areas. One of them is joining the EcoVadis platform, where we achieved a bronze medal in our first assessment.

June 13, 2023

Haute Couture is the epitome of fashion, developing custom designs for high-end fashion and not an industry usually associated with springs. However, Lesjöfors recently created its own haute couture spring for a leading global fashion brand.

May 22, 2023

When our customers have a basic knowledge in spring technology, it delivers a more cost-effective and accurate spring solution for them. Our Finnish company recently hosted a spring training day in Estonia which was a ’win, win’ for all.

May 9, 2023

Collaborating with Polestar, the electric performance car company, Lesjöfors has designed and developed the pioneering suspension springs on the Polestar 2 BST edition 270 – the limited-edition performance car created to push the boundaries of electric performance.

April 3, 2023

Lesjöfors has today signed an agreement to acquire the shares in Tollman Spring Company. inc., a US spring manufacturer. Through the transaction, Lesjöfors further strengthens its US presence following the acquisitions of John Evans’ Sons and Plymouth.

April 3, 2023

If your application requires high forces but the space for deflections is relatively small, wave springs are very often the best – and sometimes the only – alternative. Speaking examples are roller bearings and sealings between a housing and a rotating shaft.

March 6, 2023

In the US, almost every American house has a garage. Therefore, the market for residential overhead garage doors is enormous in this continent. Together with an increasing demand for overhead doors from the industrial building sector, the American door spring market is about four times larger than in Europe, an opportunity where Alcomex, part of the Lesjöfors Group, is making the most.

February 6, 2023

First week of February, Lesjöfors exhibited for the first time at Pharmapack in Paris, the world-leading exhibition for the drug delivery devices industry.

January 4, 2023

Lesjöfors, via Alcomex, has today signed an agreement to acquire 100 percent of the shares in Amatec B.V., a Dutch spring distributor. With the acquisition, Alcomex, and the Lesjöfors group, strengthens the distribution capabilities of stock springs, in line with its ambition to build the leading spring, wire and flat strip component group.

2022

December 22, 2022

Overall, we can sum up a good year for our group, despite geopolitical disturbances due to the tragic war in Ukraine and challenges in the supply chains. We benefit from the fact that Lesjöfors is solid and robust. Even though we had to close our profitable operation in Russia, the group is doing well and we will reach the goals set for the year.

December 12, 2022

Lesjöfors is a frequent exhibitor with great results from meetings at exhibition floors. The top Scandinavian industrial event Elmia Subcontractor and Valve World Expo in Düsseldorf in Mid-November were both very successful.

November 24, 2022

Springs are vital for the perceived quality of a sectional overhead garage door. If door springs are not well balanced, the door does not run smoothly. Spring technology is a complex part of the sectional overhead garage door and a mix of factors determine the life span, quality and functioning of a spring.

October 24, 2022

One of Lesjöfors’ core markets is growing rapidly – the global medical devices market. Reports show that the market is expanding worldwide. Lesjöfors is a qualified supplier of components to the sector and can meet the high demands of hygiene and quality.

October 3, 2022

In many of our Lesjöfors companies, we use apprenticeships as a strategic way to introduce, train and keep the most suitable staff for the future. In the UK, European Springs & Pressings has just on-boarded five new apprentices in an extensive program.

September 22, 2022

Heavy loads put additional pressure on vehicle suspension. This can cause a range of issues, such as reduced brake efficiency, tyre wear and difficulty in steering. It also leads to additional costs, which we have hugely reduced thanks to our new Lesjöfors suspension spring design.

September 14, 2022

Today Lesjöfors has signed an agreement to acquire 100 percent of the shares in Telform, a Turkish spring manufacturer. With the transaction, Lesjöfors expands its production footprint, in line with its ambition to build the leading spring, wire and flat strip component group.

June 28, 2022

Lesjöfors, part of the Beijer Alma group, has today signed an agreement to acquire the assets and operations of John Evans’ Sons INC, a leading US spring manufacturer. With the acquisition, Lesjöfors strengthens its US presence and significantly increases its sales to the medical industry, in line with its ambition to build the leading spring, wire and flat strip component group.

June 13, 2022

Fishing is both a profession, a hobby and a sport all over the world. Practitioners are often very careful about choosing the right equipment and fishing luck is said to vary based on the gear. Lesjöfors has recently had the honor of designing a small but important wire form for a completely new product line of fishing lures.

June 2, 2022

Springs perfectly customized for elite gymnastics spring floors is one of the latest development projects for our UK based subsidiary Lesjöfors Heavy Springs UK.

May 9, 2022

Anuga FoodTec in Cologne is the most important source of impetus for the international food and beverage industry. As the world’s most important supplier fair, it covers all aspects of food production and after two years of pandemic, the hotspot was back in business the last week of April. Lesjöfors’ experts of metal conveyor belts for the food industry were there.

May 5, 2022

We have the pleasure to announce an exciting customer case – a zero emission snowmobile. MoonBikes approached our Dutch subsidiary Alcomex for a customized spring, which later led to a wider cooperation including suspension springs.

April 21, 2022

Breaking all records, subsidiary Lesjöfors Fjädrar in Sweden recently installed the largest model ever made of Wafios wire coiling machinery.

April 4, 2022

Major world crisis affect us all in one way or another, this also applies to Lesjöfors’ operations for obvious reasons. Despite the pandemic and current state of war, we are still well equipped to continue our growth journey. Ola Tengroth, CEO of the Lesjöfors group, gives his view on the market situation.

March 28, 2022

There is a lot going on in the industrial sector to increase productivity in a more sustainable way and to reduce vulnerability in the global supply chains. One of many projects within our group is a fully automated packaging process in Germany.

March 17, 2022

The Lesjöfors group expands business to a new European market – Spain. Our Dutch company Alcomex is taking on the challenge to introduce our superior range of industrial springs and door springs to the Iberian market.

March 10, 2022

Let us introduce our newest company in the Lesjöfors group – Plymouth Spring. A highly skilled US manufacturer of springs, stampings, wire forms and precision pins.

March 7, 2022

The situation in Ukraine is a human tragedy. Our thoughts are with all those impacted by this humanitarian crisis. The Lesjöfors Group has decided to pause all operations in Russia until further notice.

February 24, 2022

To accelerate sustainability implementation, the Lesjöfors Group has recruited a Head of Sustainability. Anna Haesert is well experienced from several Swedish industrial companies. Reviewing the entire value chain, from purchasing to the final products, is one of the prioritized areas.

February 3, 2022

Lesjöfors is launching a new company, rebranding its two former European Springs & Pressings factories in Cornwall. The factories will now form a new company called Lesjöfors Heavy Springs UK.

2021

December 16, 2021

Lesjöfors outperforms in 2021, a fact which I am very happy and proud of. Once again, we have the pleasure of talking about a “record year” with both results and sales at higher levels than ever before.

December 10, 2021

Lesjöfors has acquired the assets and operations of Plymouth Spring Company, Inc., a US-based manufacturer of industrial springs. The acquisition is another step in Lesjöfors’s ambition to consolidate the industrial springs market and marks an expansion in the US market where it sees potential for further growth, both organic and through M

December 6, 2021

In November, the Lesjöfors brand won the World Automotive Component WAC (Russia MAK) 2021 award for “contribution to the development of the automotive components industry”.

October 18, 2021

Being at the forefront of the current technological revolution is key to our group’s success. Lesjöfors continues to invest and advance how we manufacture to prepare for the industry’s future. A new Bruderer machine in the UK is one step in this direction.

September 17, 2021

Lesjöfors’ gas springs business is expanding worldwide. The reasons for this are related to new sales channels and reliable deliveries as well as recovery from last year’s dip in demand caused by corona restrictions. Customers appreciate the high service level greatly.

September 8, 2021

Major new business with a manufacturer of electric cars is the outcome from a successful cooperation within the Lesjöfors Group. Extensive synergy opportunities provide manufacture and supply worldwide.

August 24, 2021

Lesjöfors’ product range is growing continuously. We can now also offer traction gas springs that provide immediate power and high safety in applications that require a controlled closing. The products are available both in the standard range and as well as custom-made adapted to individual requirements.

July 29, 2021

Lesjöfors has today entered into an agreement to divest 100 percent of its shares in S&P Federnwerk GmbH.

July 28, 2021

Lesjöfors has today acquired 88 percent of the shares in the Alcomex Group. With the transaction, Lesjöfors gains access to new geographies and a new product area, in line with its ambition to build the leading spring, wire and flat strip component group.

June 24, 2021

Do you remember this time last year? The situation was completely different; we were in the middle of a sharp decline and the worries for the future and how the pandemic would develop was in all of our minds. One year later, mass vaccinations of the population worldwide are taking place and the economy has reversed.

June 24, 2021

Metrol Springs is one of the newest members of the Lesjöfors family. With large investments in new machinery and greater access to an expansive global market, the future looks bright for the British gas spring experts.

June 3, 2021

The German Lesjöfors company Velleuer has after years of increasing business volumes decided to expand their facilities with a new building. Thanks to the larger space there will be more room for automated processes and logistics.

May 4, 2021

The Lesjöfors companies keep working on their sustainability objectives, where lower CO2 emissions are one focus area. Velleuer in Germany is a good example of how a transition to a green energy mix can lower emissions by more than half, fast and easy.

April 22, 2021

It´s springtime = time to jump around! With a new outdoor season just around the corner, the timing for a story about trampoline springs could not be better. Lesjöfors customized tension springs for trampolines have contributed to making North Trampoline’s Performer a success.

March 30, 2021

Once again, springs from Lesjöfors play a critical role in a progressive student project. The Hyperloop concept will bring super-fast, fossil-free transportation of both people and goods. A group of technical students in Sweden is competing in global events to develop the groundbreaking technology.

March 25, 2021

On April 1, the subsidiary Lesjöfors Fjädrar in Mid-Sweden will shift to biogas, which is a fossil-free energy source. The green transition will reduce the company’s carbon dioxide emissions by 70-90 per cent.

February 25, 2021

The Lesjöfors company in Herrljunga, Sweden, has taken a new, exciting approach to be at the forefront of spring development. Here, the group has established a test lab for materials and springs.

February 18, 2021

2020 was a difficult year in many aspects but there are also positive things happening. One example of this is a safety award that Lesjöfors China received from the local government, Xinqiao in Changzhou. The Xinqiao administration chose to award Lesjö

February 3, 2021

Since Mid-December 2020, a solar cell plant that covers 5,000 square meters of the rooftop of Lesjöfors Banddetaljer´s production facility in Värnamo is in operation. The solar cells are estimated to produce about 25 per cent of the plant’s annual elec

January 22, 2021

The Siegenia Group in Germany has appointed the Lesjöfors company Velleuer “Supplier of the year”. A truly prestigious award based on a partnership with high-quality products and reliable supply. Siegenia is a German manufacturer with worldwide presenc

2020

December 18, 2020

I probably do not need to repeat this, but 2020 really stands out as an extraordinary year. In times, it has been extremely tough, but our group is equipped to cope with adversity. This year, more than ever, we have shown that our stability is an unbea

December 14, 2020

One of the world’s leading suppliers of applications for stabilizing buildings in earthquake areas has its base in the south-west of England. Lesjöfors delivers springs with critical functions to the company’s joint solutions. Who would have thought, t

December 3, 2020

The start was a bit slow. Then the brakes were hit hard as things went down the ditch. Next, back on track, there was a steady re-start followed swiftly by rapid acceleration to full speed, eventually followed by a gradual return to normal. Are we refe

November 26, 2020

The Lesjöfors company Stumpp + Schüle, with sites in Germany and Slovakia, has made important decisions for the future orientation of the company by further investments in the Slovakian site and in new software tools. Despite the major challenges that

September 30, 2020

A new spot welding machine has brought many advantages to the Latvian factory. Manual tasks have been reduced and the machine can weld up to six spots on the same surface at a time, which gives a multi doubling of the efficiency.

September 8, 2020

In Latvia, a new manufacturing plant is in full swing since April and is already exceeding everyone’s expectations. The well-planned, highly sustainable facility is optimized not only for a streamlined production, but also for a healthy work environment.

August 17, 2020

In July 2020, the US company Purdy Engineering contacted John While Solutions in Singapore to develop and manufacture volute springs for a space vessel. The smooth spring development process resulted in a satisfied customer and high-performance springs in space.

June 15, 2020

Because of the covid19 spread, the demand for medical equipment is very high worldwide. The Lesjöfors company John While Solutions in Singapore has received a large order of a wire form with an important function in life-saving equipment. The US health

May 22, 2020

The Dutch Lesjöfors company Tribelt specializes in the manufacture of metal conveyor belts. A major business area is the food process industry. One customer case is the global food company McCain where Tribelt’s belts facilitate their European production.

Power springs are most commonly used to retract a cord, cable, hose, or webbing around a spool; or drive a mechanical device. You will find power springs in many everyday applications; for example the seatbelt retractor in your car, the starter for your lawn-mower, the cable retractor on your vacuum cleaner, a window blind in your house, a retractable dog leash, a mechanical clock, a tape measure, or even a medical drug delivery device.

April 14, 2020

Several of the companies within the Lesjöfors Group have many years of experience supplying the medical industry. We would like to introduce some examples of spring products specially manufactured for this industry of current interest.

March 31, 2020

Several companies affected by consequences from the coronavirus have contacted Lesjöfors. Since we have manufacturing at many locations around the world, we have solved delivery problems promptly.

March 27, 2020

Our world faces major challenges and our group must adapt to the prevailing circumstances and contribute in minimizing the risk of spreading the coronavirus. We want to be transparent about how we are affected, but also tell you our ability to deliver.

Innovative and progressive research and development is part of our DNA. Spring specialists in Sweden have recently made prototypes and tests of springs in a new, cost effective material that can withstand high temperatures. Test results are very positive.

February 25, 2020

Lesjöfors Industrifjädrar in Nordmarkshyttan, Sweden has recently invested in both a new warehouse and in leading-edge machinery. The Wafios machine strengthens production capacity considerably for torsion springs with complex geometries.

February 17, 2020

UK based Metrol Springs is the newest company in the Lesjöfors group. Their gas struts are able to suit many unique customer requirements and the solutions are effective. One example is a custom-made anvil slide that helps to utilize the truck space more effectively.

February 10, 2020

Lesjöfors’ market was heavily affected by external factors last year. An overall downturn in the automotive aftermarket, uncertainty with Brexit and the trade conflict between America and China was some of them. To be prepared for the future, Lesjöfors has made major investments in existing operations and acquired highly qualified spring manufacturers. Lesjöfors’ new CEO gives his thoughts on the coming market development.

January 31, 2020

Exhibition season will soon be in full flow and the Lesjöfors group is getting ready for interesting and fruitful spring discussions all across the globe.

January 2, 2020

Lesjöfors AB is delighted to announce its acquisition of the shares in Metrol Springs Ltd, a leading manufacturer of tooling gas springs, special purpose gas springs, and gas struts, within the UK and other global markets.

2019

November 27, 2019

The Brittish Lesjöfors company European Springs & Pressings, one of the largest suspension spring manufacturers in Europe, has confirmed its position and commitment to the automotive sector with the recent purchase of a large-scale powder coating line.

November 22, 2019

Once again, Lesjöfors can sum up four fruitful days filled with inspirational conversations and enquiries at the Elmia Subcontractor show in Jönköping. Nine of the Nordic Lesjöfors companies gathered in a joint operation and the spring discussions were countless in the stand.

October 24, 2019

In order to provide the best possible trampoline experience, tension springs with ultimate properties are required. North Trampoline has, assisted by Lesjöfors, developed a premium product with the exact firmness and a long lifespan, that professional jumpers call “world class”.

October 3, 2019

Haldex has successfully finished the joint development of the ModulT disc brake with one of the world’s largest truck manufacturer, and is now starting serial production for an all-wheel drive truck. No less than three Lesjöfors companies supply springs and stampings to the new disc brake system.

September 27, 2019

Over the past several decades, Lesjöfors has grown internationally and displayed strong, profitable growth under the leadership of Kjell-Arne Lindbäck, who will be retiring after the end of the year. Ola Tengroth has now been appointed as the company’s new CEO.

September 25, 2019

From August, Lesjöfors Tinglev in Denmark has expanded their production capacity with new machinery from Wafios to enable a faster production and an increased spring range.

August 28, 2019

Since many years, Lesjöfors works effortlessly within the field of environmental, ethical and social responsibility in close collaboration with our owner company Beijer Alma. The group is now setting new goals for the coming five-year period with an even bigger focus on sustainability.

June 26, 2019

At a ceremony on June 4, world leading power tool producer Stihl awarded Velleuer with their prestigious “Supplier of the year”. Velleuer received the award for outstanding accomplishments with respect to quality, technology, innovation, service and price-performance ratio.

June 24, 2019

Material. Manufacturing process. Design. How the three factors interact is crucial for the characteristics of a spring. Without relevant academic research in this field in Sweden Lesjöfors develops the knowledge needed to design springs for harsh environments.

June 17, 2019

For many years, Lesjöfors China has worked hard to be a top class automotive supplier. In addition to full awareness and compliance to our automotive customers’ needs, improved quality methods for customers in other segments are also achieved.

May 27, 2019

Thirty-three of the Lesjöfors group’s most skilled technicians recently met for training and discussions in Velbert, Germany. The conference included lectures, sharing of new technical knowledge, a study visit etc.

May 14, 2019

Lesjöfors, one of Europe’s leading manufacturer of springs, pressings and wire parts acquires Spirbelt Beheer B.V., which includes its two subsidiaries Tribelt and De Spiraal in the Netherlands.

May 2, 2019

The Hannover Messe is the largest and most important industrial fair in the world with 6,000 exhibitors and more than 200,000 visitors annually. Lesjöfors was one of the exhibiting companies representing the partner country Sweden.

April 26, 2019

Our springs are used in all facets of everyday life and are essential in many environments and applications. What we aren’t used to seeing is hats suspended from our springs in the bathrooms of one of London’s most exclusive restaurants.

April 18, 2019

Did you know that Lesjöfors is a major distributor of coil springs and gas springs to the automotive industry in Russia? On April 6-7 2019, our Russian representatives participated at the Phaeton Expo and experienced two interesting days.

April 2, 2019

2018 was a memorable year for the Lesjöfors Group; we have never before experienced such a boost in sales. Our strategy with a decentralized structure where we work close to the customer´s operation is our main key to success.

March 28, 2019

At a ceremony on March 25th in Tianjin, Lesjöfors China´s MD Mikael Andersson received the prestigious award “Excellent Quality Supplier of 2018” by Danfoss, one of the leading actors within climate and energy technology.

March 7, 2019

The employees at Velleuer have great opportunities to develop their skills and take new steps in their careers. Study visit to other industrial companies is one way of enhancing skills; another is further training at the local technical academy.

February 25, 2019

Lesjöfors’ Norwegian company is a major player in spring supply to the Norwegian manufacturing business. In February 2019, Lesjöfors A/S celebrates its 25th anniversary.

February 14, 2019

Lesjöfors has now released a new version of our 3D CAD service. The new version includes more features and we have put an effort in making the search engine more user-friendly.

January 18, 2019

Exploding in to the New Year, European Springs & Pressings, supported by their parent company Lesjöfors, have invested 1 million euros in a new spring coiling machine, the first of its kind in the UK.

2018

December 19, 2018

During two intense days in Stockholm, technical staff from the group´s companies in the business area Pressings met for sharing new knowledge, group discussions and networking.

December 12, 2018

Taking the stress out of pre-stressing, Lesjöfors´ UK company European Springs & Pressings have invested in a unique invention, with the design of an automated pre-stressing machine. Another important chapter in the company’s success story of 70 years in the spring business.

December 6, 2018

Our wide product range has now reached a whole new continent – Australia. ASI Springs, Australia’s premium stock spring specialists, has decided to take on a range of Lesjöfors´ torsion springs in stainless steel for distribution on the Australian market.

November 20, 2018

Elmia Subcontractor is over for 2018. Never before has the Lesjöfors Group received so many interesting inquiries and so many new leads as from this year´s trade show.

November 13, 2018

Springs have been at the heart of engineering since before the Industrial Revolution and now they are set to be a key part of today’s Robotic Revolution. In cooperation with Robot Studio, Lesjöfors is providing springs for the future.

November 5, 2018

The oil and energy industry in Norway is experiencing a positive increase after some years of reduced activity. Optimism became visible on the Offshore Technology Days (OTD), the industry’s annual meeting place.

October 17, 2018

The UK based Lesjöfors company European Springs & Pressings has doubled the size of its Cornwall operation with the purchase of a new 2000 square metre site.

October 9, 2018

Finland is booming and the industrial sector is leading the way. The great optimism was noticeable in the buzz at Alihankinta, the annual trade show for subcontractors in Finland.

September 26, 2018

One million patients are seen every 36 hours by the National Health Service (NHS) in the UK. Sanandco and their MonitorMe product, with springs supplied by European Springs & Pressings, is working on easing this NHS headache.

August 24, 2018

Is there anything springier than a trampoline? In most people’s eyes, it certainly is a typical use of a spring. Lesjöfors, known for developing the best and most durable tension springs on the market, have recently expanded into the trampoline sector.

June 26, 2018

The Danish Lesjöfors company in Tinglev has shown impressive results in reliable supplies for a long time. Delivery quality measurements show almost a full score year after year, which customers’ value highly.

June 26, 2018

The organic growth that started in the second part of 2017 continues in an even stronger way in 2018. Lesjöfors’ CEO Kjell-Arne Lindbäck sums up the year so far and looks to the future.

June 12, 2018

A recent investment, making the most of the latest digital technologies managing the day-to-day running of the business for European Springs & Pressings, has empowered staff in the Cornwall factory to rise to the challenge.

June 5, 2018

Lesjöfors has a constant focus on streamlining the production with automatized processes at all units. Consequently, a new piston rod assembling machine for gas springs production has been installed in the Latvian company.

May 3, 2018

For the third time, Lesjöfors Slovakia has been awarded as one of the best suppliers to global company Kiekert. In 2017, Lesjöfors was the second best supplier in Europe.

April 17, 2018

Springs are used in the most various of fields. Don´t miss out Lesjöfors springs displaying the latest in trainer trends from the iconic sporting brand Nike in the Oxford Street store in London.

April 6, 2018

From March 20-23 2018 the ESEF trade fair was held in Utrecht, the Netherlands. The Lesjöfors stand was well-attended and many productive discussions was held with new and existing customers.

March 13, 2018

Shakespeare said “all the world’s a stage and all the men and women merely players” and for the Cornwall factory of European Springs & Pressings, a company in the Lesjöfors group, this couldn’t be more true.

February 27, 2018

In the Mid-Sweden, the motor enthusiast Pelle Söderström is in the final phase of finishing the world´s first and only straight 16-cylinder car engine. The engine contains valve springs from Lesjöfors.

February 1, 2018

Lesjöfors has for many years sponsored various student projects with products and know-how. Besides a good exposure of the product range it also presents Lesjöfors as a highly qualified employer.

January 24, 2018

Lesjöfors in Denmark has been appointed Company of the Year 2017 by Bröndby community. Lesjöfors receives the award for the many years of social commitment providing internship for unemployed citizens.

2017

December 12, 2017

A new form of trainee program has been implemented in Slovakia to increase the numbers of technical skilled workers. Lesjöfors company Centrum B* has in 2017 employed young workers who will combine a technical education with internship in the company.

December 5, 2017

Lesjöfors has participated in an innovation project for wheel lockers. The new wire product prevents truck wheels from falling off with a simple and reusable construction.

October 27, 2017

Lesjöfors´ wide range of standard springs is unique in the world market. The new edition of the spring catalogue is slightly changed and improved. The range is more extensive than ever.

October 16, 2017

Deutsche Post DHL Group’s StreetScooter GmbH has worked hard to make e-mobility standard practice in the logistics industry. The German Lesjöfors company Velleuer is supplying wire rod items to the vehicles.

October 10, 2017

Through efficient cooperation with Lesjöfors Industrifjädrar, technology company CEJN has introduced a new product on the market. The product is a quick coupling for electric and air chargers on rescue vehicles.

September 20, 2017

Wave springs can be the perfect solution when spring space is limited. A wave spring provides the same effect as a spiral or compression spring but with half of the spring height.

July 3, 2017

Lesjöfors, with 26 production sites worldwide, is a global spring company with the perhaps widest product range. Through our decentralized structure and local way of working where we know our customer, we ensure the best customer service.

July 3, 2017

Lesjöfors in Tinglev has a strong focus on further developing their good customer relations. The company has three customer access points: purchase, construction and logistic. Now they have started spring training courses for customers.

June 2, 2017

The UK based Lesjöfors subsidiary European Springs & Pressings Ltd have outgrown its Yorkshire office and warehouse. Now it’s relocating to a new, purpose built facility in Huddersfield.

May 15, 2017

The Hannover Messe is one of the largest industrial meeting points in the world. During the busy days 23-27 April, 225 000 attendees mingled among 6 500 exhibitors. The Lesjöfors staff experienced great interest in their stand.

April 28, 2017

The Beijer Alma scholarship for 2017 is awarded to Zigurds Sudints, development engineer at Lesjöfors in Latvia. Zigurd won the prize for his innovative approach, enthusiasm and competence.

April 5, 2017

Mastering the manufacturing behind a new and innovative product is a task engineer’s relish. Lesjöfors subsidiary European Springs & Pressings got stuck right into the project when approached by the sticky tape dispenser company, TapePal.

March 24, 2017

Spiralspecialisten AB, a subsidiary of the Lesjöfors Group, has acquired the spring operations of Swedish company Spiros AB – a spring manufacturer with more than 90 years in the business.

February 27, 2017

Velleuer, part of the Lesjöfors Group, has developed a manufacturing process for stampings with extreme purity requirements for the German automotive industry. In custom-built washing equipment the components are cleaned, rinsed and dried.

February 10, 2017

At the end of the year we received amazing news that Lesjöfors Automotive AB as well as Lesjøfors AS have been awarded ”Supplier of the Year” by its customers. Great customer focus and high support level is highlighted as important key factors to the success

January 25, 2017

The new production plant for Lesjöfors´ Slovakian company Centrum B is now officially opened. At an opening ceremony on November 23 the new ultramodern production facitilities were inaugurated.